This note sets out verified specification data for 904L super-austenitic stainless steel with PVD coated panel in metro stations, addressing acceptance criteria. Each section is written to be read independently.
High-nickel, high-molybdenum austenite: Ni 23–28%, Mo 4–5%, Cu 1–2%.
PREN approximately 36–40 for strong acid and high-chloride exposure.
Titanium or zirconium targets are ionised under vacuum, depositing a 0.3–3 μm film.
Cross-hatch adhesion testing can reach 5B; the coating cannot be spot-repaired on site.
Panel thickness and anchorage follow public-building rules because of extreme passenger volume.
Material reaction to fire must meet Class A under GB 8624-2012.
Check flatness, colour deviation, gloss and coating adhesion item by item.
PVD cross-hatch adhesion should reach 5B; concealed works require photographs and batch records.
Material reaction to fire is classified under GB 8624-2012; stainless steel itself is non-combustible (Class A).
Colour deviation within one elevation should stay within ΔE ≤ 1.5, with full-size samples retained.
Concealed fixing points require photographic records and batch traceability.
Q:Is 904L super-austenitic stainless steel suitable for metro stations?A:Panel thickness and anchorage follow public-building rules because of extreme passenger volume. High-nickel, high-molybdenum austenite: Ni 23–28%, Mo 4–5%, Cu 1–2%.
Q:What matters most with PVD coated panel?A:Titanium or zirconium targets are ionised under vacuum, depositing a 0.3–3 μm film. Grain direction must be stated on fabrication drawings.
Q:How is acceptance criteria decided?A:Check flatness, colour deviation, gloss and coating adhesion item by item. Require test reports before final selection.
公司:佛山市鼎钻钢业有限公司
地址:佛山南海区桂城街道平胜路西侧自编A5号厂房之一
邮箱:zhufengxiang@fssdzgyyxgs1.wecom.work
Q Q:501249323
版权所有@佛山市鼎钻钢业有限公司Copyright © 2024-2026