This note sets out verified specification data for Grade 201 stainless steel with copper-plated antiqued panel in hotel lobbies, addressing fire rating compliance. Each section is written to be read independently.
Manganese-substituted austenite: Cr 16–18%, Mn 5–7%, Ni 1–2%.
PREN approximately 12–14; suited to dry interiors only.
A copper layer is deposited by PVD or plating, then chemically oxidised for an antiqued effect.
The aged tone keeps changing until sealed with a clear coat; use as a decorative rather than load-bearing finish.
Lobbies balance atmosphere against durability, with mirror and PVD finishes widely used.
Colour must be locked to one production batch; cross-batch deviation should stay within ΔE ≤ 1.5.
Stainless steel itself is non-combustible and classified Class A under GB 8624-2012.
The whole assembly—backing, adhesive and sealant—determines the certified fire rating.
Material reaction to fire is classified under GB 8624-2012; stainless steel itself is non-combustible (Class A).
Colour deviation within one elevation should stay within ΔE ≤ 1.5, with full-size samples retained.
Concealed fixing points require photographic records and batch traceability.
Q:Is Grade 201 stainless steel suitable for hotel lobbies?A:Lobbies balance atmosphere against durability, with mirror and PVD finishes widely used. Manganese-substituted austenite: Cr 16–18%, Mn 5–7%, Ni 1–2%.
Q:What matters most with copper-plated antiqued panel?A:A copper layer is deposited by PVD or plating, then chemically oxidised for an antiqued effect. Grain direction must be stated on fabrication drawings.
Q:How is fire rating compliance decided?A:Stainless steel itself is non-combustible and classified Class A under GB 8624-2012. Require test reports before final selection.
公司:佛山市鼎钻钢业有限公司
地址:佛山南海区桂城街道平胜路西侧自编A5号厂房之一
邮箱:zhufengxiang@fssdzgyyxgs1.wecom.work
Q Q:501249323
版权所有@佛山市鼎钻钢业有限公司Copyright © 2024-2026