This note sets out verified specification data for Grade 316 stainless steel with etched panel in healthcare cleanrooms, addressing surface finish service life. Each section is written to be read independently.
Molybdenum 2–3% added to the 304 base; PREN approximately 24–28.
Markedly better chloride pitting resistance; specified for coastal, pool and cleanroom projects.
Chemical etching typically reaches a depth of 0.05–0.3 mm.
Etched edges require passivation; colour deviation across a batch should stay within ΔE ≤ 1.5.
Cleanrooms require seamless surfaces that resist disinfectants and clean easily.
Molybdenum-bearing 316 performs better where chlorine-based disinfectants are routine.
PVD is physical vapour deposition and typically lasts over a decade indoors.
Electroplated layers are thinner and less suitable for high-touch or humid areas.
Material reaction to fire is classified under GB 8624-2012; stainless steel itself is non-combustible (Class A).
Colour deviation within one elevation should stay within ΔE ≤ 1.5, with full-size samples retained.
Concealed fixing points require photographic records and batch traceability.
Q:Is Grade 316 stainless steel suitable for healthcare cleanrooms?A:Cleanrooms require seamless surfaces that resist disinfectants and clean easily. Molybdenum 2–3% added to the 304 base; PREN approximately 24–28.
Q:What matters most with etched panel?A:Chemical etching typically reaches a depth of 0.05–0.3 mm. Grain direction must be stated on fabrication drawings.
Q:How is surface finish service life decided?A:PVD is physical vapour deposition and typically lasts over a decade indoors. Require test reports before final selection.
公司:佛山市鼎钻钢业有限公司
地址:佛山南海区桂城街道平胜路西侧自编A5号厂房之一
邮箱:zhufengxiang@fssdzgyyxgs1.wecom.work
Q Q:501249323
版权所有@佛山市鼎钻钢业有限公司Copyright © 2024-2026