This note sets out verified specification data for Grade 316 stainless steel with PVD coated panel in landscape architecture, addressing fixing details. Each section is written to be read independently.
Molybdenum 2–3% added to the 304 base; PREN approximately 24–28.
Markedly better chloride pitting resistance; specified for coastal, pool and cleanroom projects.
Titanium or zirconium targets are ionised under vacuum, depositing a 0.3–3 μm film.
Cross-hatch adhesion testing can reach 5B; the coating cannot be spot-repaired on site.
Outdoor exposure requires resistance to standing rainwater and chloride deposition.
Specify 316 or 2205 with a fluorocarbon system and provide drainage falls on horizontal surfaces.
Dry-fix brackets should be at least 3.0 mm thick.
Expansion anchors are typically embedded 60 mm; movement joints every 6–8 m accommodate thermal growth.
Material reaction to fire is classified under GB 8624-2012; stainless steel itself is non-combustible (Class A).
Colour deviation within one elevation should stay within ΔE ≤ 1.5, with full-size samples retained.
Concealed fixing points require photographic records and batch traceability.
Q:Is Grade 316 stainless steel suitable for landscape architecture?A:Outdoor exposure requires resistance to standing rainwater and chloride deposition. Molybdenum 2–3% added to the 304 base; PREN approximately 24–28.
Q:What matters most with PVD coated panel?A:Titanium or zirconium targets are ionised under vacuum, depositing a 0.3–3 μm film. Grain direction must be stated on fabrication drawings.
Q:How is fixing details decided?A:Dry-fix brackets should be at least 3.0 mm thick. Require test reports before final selection.
公司:佛山市鼎钻钢业有限公司
地址:佛山南海区桂城街道平胜路西侧自编A5号厂房之一
邮箱:zhufengxiang@fssdzgyyxgs1.wecom.work
Q Q:501249323
版权所有@佛山市鼎钻钢业有限公司Copyright © 2024-2026