This note sets out verified specification data for Grade 201 stainless steel with liquid-metal panel in residential kitchens and baths, addressing cost calculation. Each section is written to be read independently.
Manganese-substituted austenite: Cr 16–18%, Mn 5–7%, Ni 1–2%.
PREN approximately 12–14; suited to dry interiors only.
Irregular flowing patterns are usually produced by custom etching or digital printing.
Flatness is the main acceptance challenge; project tolerances are typically within 0.3 mm.
Brushed finishes are easier to maintain than mirror finishes in grease-prone kitchens.
Chloride sources must be controlled in wet areas and joints sealed with neutral silicone.
Life-cycle cost = material + fabrication + installation + maintenance + replacement.
316 costs more upfront but extends replacement intervals in coastal environments.
Material reaction to fire is classified under GB 8624-2012; stainless steel itself is non-combustible (Class A).
Colour deviation within one elevation should stay within ΔE ≤ 1.5, with full-size samples retained.
Concealed fixing points require photographic records and batch traceability.
Q:Is Grade 201 stainless steel suitable for residential kitchens and baths?A:Brushed finishes are easier to maintain than mirror finishes in grease-prone kitchens. Manganese-substituted austenite: Cr 16–18%, Mn 5–7%, Ni 1–2%.
Q:What matters most with liquid-metal panel?A:Irregular flowing patterns are usually produced by custom etching or digital printing. Grain direction must be stated on fabrication drawings.
Q:How is cost calculation decided?A:Life-cycle cost = material + fabrication + installation + maintenance + replacement. Require test reports before final selection.
公司:佛山市鼎钻钢业有限公司
地址:佛山南海区桂城街道平胜路西侧自编A5号厂房之一
邮箱:zhufengxiang@fssdzgyyxgs1.wecom.work
Q Q:501249323
版权所有@佛山市鼎钻钢业有限公司Copyright © 2024-2026