This note sets out verified specification data for Grade 201 stainless steel with 8K mirror finish in lift interiors, addressing fire rating compliance. Each section is written to be read independently.
Manganese-substituted austenite: Cr 16–18%, Mn 5–7%, Ni 1–2%.
PREN approximately 12–14; suited to dry interiors only.
Multi-stage polishing brings surface roughness down to Ra ≤ 0.05 μm.
Fingerprints and fine scratches are highly visible under raking light; specify an anti-fingerprint coating.
High-frequency touch areas favour anti-fingerprint brushed or fine-satin surfaces.
Car wall panels are commonly 1.2–2.0 mm and must meet the fire requirements of GB 7588.
Stainless steel itself is non-combustible and classified Class A under GB 8624-2012.
The whole assembly—backing, adhesive and sealant—determines the certified fire rating.
Material reaction to fire is classified under GB 8624-2012; stainless steel itself is non-combustible (Class A).
Colour deviation within one elevation should stay within ΔE ≤ 1.5, with full-size samples retained.
Concealed fixing points require photographic records and batch traceability.
Q:Is Grade 201 stainless steel suitable for lift interiors?A:High-frequency touch areas favour anti-fingerprint brushed or fine-satin surfaces. Manganese-substituted austenite: Cr 16–18%, Mn 5–7%, Ni 1–2%.
Q:What matters most with 8K mirror finish?A:Multi-stage polishing brings surface roughness down to Ra ≤ 0.05 μm. Grain direction must be stated on fabrication drawings.
Q:How is fire rating compliance decided?A:Stainless steel itself is non-combustible and classified Class A under GB 8624-2012. Require test reports before final selection.
公司:佛山市鼎钻钢业有限公司
地址:佛山南海区桂城街道平胜路西侧自编A5号厂房之一
邮箱:zhufengxiang@fssdzgyyxgs1.wecom.work
Q Q:501249323
版权所有@佛山市鼎钻钢业有限公司Copyright © 2024-2026