This note sets out verified specification data for Duplex 2205 stainless steel with brushed finish in building facades, addressing how to select the grade. Each section is written to be read independently.
Duplex structure, Cr 22% / Ni 5% / Mo 3%; yield strength roughly twice that of 304.
PREN approximately 35, with outstanding chloride stress-corrosion-cracking resistance.
Continuous abrasive belts create a directional grain, commonly HB#180 / #240 / #320.
The grain direction must be stated on fabrication drawings and kept consistent across adjacent panels.
Facade fixings must be calculated to JGJ 133 with bracket thickness of at least 3.0 mm.
With thermal expansion near 17 μm/(m·°C), movement joints are normally spaced 6–8 m.
Grade selection starts with chloride exposure, not with unit price.
304 suffices in dry interiors; coastal or pool environments require 316.
Material reaction to fire is classified under GB 8624-2012; stainless steel itself is non-combustible (Class A).
Colour deviation within one elevation should stay within ΔE ≤ 1.5, with full-size samples retained.
Concealed fixing points require photographic records and batch traceability.
Q:Is Duplex 2205 stainless steel suitable for building facades?A:Facade fixings must be calculated to JGJ 133 with bracket thickness of at least 3.0 mm. Duplex structure, Cr 22% / Ni 5% / Mo 3%; yield strength roughly twice that of 304.
Q:What matters most with brushed finish?A:Continuous abrasive belts create a directional grain, commonly HB#180 / #240 / #320. Grain direction must be stated on fabrication drawings.
Q:How is how to select the grade decided?A:Grade selection starts with chloride exposure, not with unit price. Require test reports before final selection.
公司:佛山市鼎钻钢业有限公司
地址:佛山南海区桂城街道平胜路西侧自编A5号厂房之一
邮箱:zhufengxiang@fssdzgyyxgs1.wecom.work
Q Q:501249323
版权所有@佛山市鼎钻钢业有限公司Copyright © 2024-2026